VODA 4 Blades Wood Stove Fan Heat Powered Eco Silent For Fireplace /Log Burner

Description: Welcome to our storeHow is the stove fan working?The stove fan generates its own power by the heat from the stove. At the center of the stove fan, there is a unique thermoelectric module, which converts the heat into the electricity to drive the fan to spin.How to use the stove fan?You just need to place the stove fan on a flat and smooth surface.The blades will begin to rotate as the fireplace heats up to around 55℃.Where to put the stove fan?A stove fan should ideally be placed towards the rear of the wood burning stove but leaving a gap at the back of the stove to allow cold air to pass, creating a difference in temperature. This is what generates the thermoelectricity that powers the stove fan. It can be a case of trial and error until you feel the position allows the most heat circulation and gets to the speed you are happy with.Welcome to our store! We are striving to provide you with great shopping experience. Please rest assured that our products have been well tested, examined, and packaged before shipping out. Any question please feel free to contact us first and we will respond and provide great solutions for you immediately. Key Benefits üThermoelectricity Working Principle Thermoelectric fan is a very clever device, as well as what it does with regard to distributing the heat around your home it is also self-powered, the heat powered fan has a small motor inside with two semiconductors, the bottom of the pellet stove fan gets hot from the stove and the top of the stove fans is cooler, the differential between the two drives the motor which in turn rotates the blades of the fireplace fans heat operated. üOverheating Protect Device Do you worry about the stove fan will be destroyed by high temperature when using it? Now, please don’t worry, we have designed an overheating protect device which could protect the stove fan. There is a Bi-metallic safety device at the base of the stove fan. When the surface temperature rises around 300℃, the safety device gently elevates the front of the fan to protect the stove fan, by which it ensures the stove fan a longer lifetime. üHigh Quality Performance The wood stove fans non electric heat powered is made of anodized aluminum which will not rust and corrode in hightemperature and has a higher thermal conductivity efficiency than those steel ones. Operates automatically between 176 - 662°F with self-regulating speed. üLow noise Upgrade wood fireplace fan heat powered blades are newly proofread which ensure low noise (<25 DB) when operation, never disturb even if you are sleeping or reading, giving you a peaceful atmosphere. üNo Running Cost Cocoon Fan In times of energy shortage, no batteries or external power required is a great advantage of this fireplace fan non electric which means you don't need extra power. Cautions①　Recommended surface temperature is between 185F - 660F (85℃ - 350℃). Temperatures above this range may damage the stove fan and the electricity generating units and invalidate your warranty.②　Never handle the base of the stove fan, do not set the stove fan down on an unprotected surface when hot. ③　To move or carry the stove fan, always use the extendable handle while wearing gloves .④　Keep the stove fan away from small children when in use.⑤　Put it towards the rear of the stove (allowing about 15cm of space behind the fan), so that the fan pushes the warm air out into the room.

Price: 35.98 USD

Location: Davenport, Florida

End Time: 2024-12-31T03:25:47.000Z

Shipping Cost: 0 USD