Ultrasonic Mouse Repeller Car Vehicle Rat Rodent Repellent Pest Animal Deterrent

Description: Why choose the Ultrasonic Pest Repellent for Vehicles?Rodents and other animals might take shelter under the hood of your engine, especially during chilly winter and spring days since car engines are usually warm, dry, and undisturbed, providing an ideal shelter for feeding, resting, or breeding. Once in there, engine wires are particularly vulnerable to rodent damage. If rodents chew away the wires' insulation, it can cause short circuits, resulting in expensive damage to the engine. What's the working principle of the rodent repeller?The continuous and intermittent changing ultrasonic frequency and the high-frequency flashing of the LED light stimulate the rodent's brain nervous system, and auditory and visual systems, making them intolerable and fleeing, thereby driving the rodents away from your home and vehicles. How does the ultrasonic pest repeller work?After turning on the machine, the machine enters the self-check program 1. The white and red lights will stay on for 2 seconds and then enter the operating mode. 2. Simultaneously, the horn will continue to sound(110dB) for 2 seconds and then enter active mode. 3. If there is a shock effect, it will pause for 2 minutes after the shock and automatically start. Working mode（no vibration detected） 1. The red LED indicator flashes once every 2 seconds (3hz) and enters intermittent transition after 10 seconds; the duration is 100s, then repeats. 2. The white LED flashes for 2s (6hz)-stop for 2s-flashes for 2s (2hz)-stops for 2s-flashes for 2s (4hz) and enter the intermittent transition the duration is 100s and then repeats. 3. The working state of the ultrasonic horn is 15khz-36kzh sweep frequency for four seconds-stop, 3s--15khz-36kzh sweep the frequency for 3 seconds, and then enter the intermittent, the duration is 100s and then repeat. The above three work at the same time 4. During the intermittent state, the green indicator light flashes once every 5s. When the car starts, the machine's vibration sensing device starts and stops the above working mode. After the last vibration in 2 minutes, the machine enters the operating mode again. During this period, the red indicator light flashes every 5s. Test Notes:1. To check if the battery spring is reversely or not. 2. Battery should be checked if needed. 3. Whether the external power supply test light is on Frequently Asked Questions 1. Is this chargable? Can I charge it in my car? Yes! Of course, it is chargeable, and it can be charged by vehicle power. You can connect it to vehicle power with the included cable, which will not drain the car battery. 2. How long does it work? A 4-pack batteried set in can work up to 60 days. (Battery not included)

Price: 14.82 USD

Location: Cary, North Carolina

End Time: 2024-12-23T10:05:12.000Z

Shipping Cost: 0 USD