Tempo Communications Greenlee 620K-G Security / Alarm Tone and Probe Kit

Description: To better satisfy industry requirements, we’ve combined the new Model PE 620 Loop Verifier with the popular Model 200EP Inductive Amplifier in this convenient kit. Designed specifically for the security and alarm industry, the PE 620 can be connected to a Normally Open or Normally Closed loop pair and provides a distinct audible tone when the alarm condition occurs. Both units fit comfortably in the rugged 700C Carrying Case made of durable woven polyester. FEATURES • The non-latching function provides a simple method for identifying intermittent failures (swingers) and confirming operation of switches at remote locations. • In the latching mode, the unit will catch the alarm condition and continue sounding until the tester is reset. • As a tone generator, the unit provides a traditional variable tone that can be applied using the 24 inch red and black test leads or a convenient 6 position modular plug. • Convenient magnetic back plate allows the PE 620 to be attached directly to the control panel cabinet or door. BENEFITS • Battery operated (9V not included) and can be used on any wiring system including datacom, telecom, security/alarm, audio and CATV. • Provides tone signaling, continuity testing and telephone line polarity indication combined with a modular breakout adapter. • Selectable tone outputs for identifying multiple cable runs. • Includes multiple connection options. Model 200EP Inductive Amplifier Electrical: Gain: 26dB Input Impedance: 100MΩ Probe Tip Resistance (min): Plastic Tip: 300Ω Frequency Range: approx. 500Hz - 5kHz Power Source: Battery: 1 x 9V Battery Life (nominal): 50 hrs. Environment: Operating Temperature: 0°C to 50°C (32°F to 122°F) Storage Temperature: -50°C to 75°C (-58°F to 167°F) Relative Humidity: 80% Physical: Length: 229mm (9.0 inches) Width: 54mm (2.125 inches) Depth: 28mm (1.125 inches) Weight: 0.16kg 0.34lbs) Warranty: One Year 620K Security & Alarm Kit PE 620 Loop Verifier Electrical: Output Voltage (Talk Battery into 600Ω): 4.5VDC Output Power (into 600Ω): +3 dBm Output Frequency: 900/980 Hz alternating Voltage Protection: 120V AC Continuity: Normally Open: On <50kΩ, Off >80kΩ Normally Closed: On >120kΩ, Off <80kΩ Latch Sensitivity: any occurrence>100mS Power Source: Battery: 1 x 9V Battery Life: Tone Mode (nominal): 100 hours Cont/Discont Mode nominal: 15 hours Environment: Operating Temperature: 0°C to 50°C (32°F to 122°F) Storage Temperature: -50°C to 75°C (-58°F to 167°F) Physical: Length: 113mm (4.45 inches) Width: 60mm (2.375 inches) Depth: 25mm (1.0 inches) Weight: 0.15kg (5.44 oz) Warranty: One Year © 2004 Tempo ML-0226. 10/04 tel: +44 (0) 1633 225600 fax: +44 (0) 1633 225601 email: info@cve.co.uk Subject to change without notice tel: +1 815 397-4279 fax: +1 815 397-1865 email: info@tempo.textron.com TESTING A NORMALLY OPEN SWITCH TESTING A NORMALLY CLOSED SWITCH Method 1 1. Connect 620 to a pair that has been disconnected at control panel. 2. Slide switch to “N.O.” position. 3. If switch open, No signal will be heard. 4. Move to Alarm switch & close switch. Tester will produce a distinct audible signal while the switch is closed. 5. To test a Normally Closed switch. 6. If Alarm switch closed, tester will output a distinct audible signal. Method 2 1. Connect 620 to a pair that has been disconnected at control panel. 2. Slide switch to “N.O. LATCH” position 3. If switch open No signal will be heard. 4. Move to Alarm switch & close switch. Tester will produce a distinct audible signal that will continue after the switch has been reopened. Method 1 1. Connect 620 to a pair that has been disconnected at control panel. 2. Slide switch to “N.O.” position. 3. If switch open, No signal will be heard. 4. Move to Alarm switch & close switch. Tester will produce a distinct audible signal while the switch is closed. 5. To test a Normally Closed switch. 6. If Alarm switch closed, tester will output a distinct audible signal. Method 2 1. Connect 620 to a pair that has been disconnected at control panel. 2. Slide switch to “N.O. LATCH” position 3. If switch open No signal will be heard. 4. Move to Alarm switch & close switch. Tester will produce a distinct audible signal that will continue after the switch has been reopened.99

Price: 149 USD

Location: Brooklyn, New York

End Time: 2024-09-18T19:34:10.000Z

Shipping Cost: N/A USD