Solder 75% Silver brazing wire 3ft "Hard" with 1/2 ml of Stay-Silv Flux

Description: This kit contains75% Silver "750 Hard" Brazing Wire. Three (3) feet of Round 20 GA wire (0.032" Dia)PLUS more than 1/2 ml of Stay-Silv(r) Flux in a handy 1 ml applicator syringePlease See Manufacturer's Safety Warning Below for FluxSolder Wire is Braze 750 Alloy (non-toxic) Silver 75.0% ±1.0% Copper 22.0% ± 1.0% Zinc 3.0% ± 1.0% Solidus/Liquidus (range of melting)740 /790 C1364/1454 F Use this wire for fine repair of sterling where the joint will be visible - best color matchUse this to "pre-braze" joints in two step brazing (56% can be filled without melting the 75%)Shipping is from USA first class package. Other (priority) shipping arrangements are available if desired There are longer coils available - just ask I also have Round 20 GA 65% easy, 75% hard & 70% medium available.Also 30% and 45% silver 14 gauge solder wire are in stock Jewelry : Silver Solder - Brazing wire Safety Warning For Flux - search for text in red to find a copy of the MSDS:--------------------------------------------------------------------------------------------------------------------------------------------------------------Harris Stay-Silv(r) White Brazing Flux Danger: Before use, read MSDS PN SSWF1 EDP No. 40023 For brazing stainless steel, monel nickel, copper, brass, bronze and other ferrous and non-ferrous metals and alloys. Use with Stay-Silv(r), Safety-Silv(r) and other brazing filler metals. Chemically active from 800 to 1600 F, extremely fluid, will penetrate the tightest joints. Not subject to recrystallization (lumpiness-hardening). Meets Fed. Spec. OF499 (Type B), AWS FB3A, AMS 3410. May be water thinned. Remove all flux residue on completion of brazing. Keep out of reach of Children The Harris Products Group, Mason, Ohio 45040 U.S.A. Made in Mexico Warning Contains Fluorides. Protect yourself and others. Read and understand this information. FUMES AND GASES CAN BE HAZARDOUS TO YOUR HEALTH. BURNS EYES AND SKIN ON CONTACT. CAN BE FATAL IF SWALLOWED. Before use, read and understand the manufacturer’s instructions, Material Safety Data Sheets (MSDS) and your Employer’s safety practices. Keep your head out of the fumes. Use enough ventilation, exhaust at the flame or both, to keep fumes and gases from your breathing zone and the general area. Avoid contact with the eyes and do not take internally. Keep out of reach of children. See American National Standard Z49.1, “Safety in Welding, Cutting and Allied Processes”, published by the American Welding Society, 550 N.W. Lejeune Rd. Miami, Florida 33126; OSHA Safety and Health Standards 29 CFR 1910, available from the U.S. Government Printing Office, Pittsburgh, PA 15250 First Aid: If contact in eyes, flush with clean water for at least 15 minutes. If swallowed, call physician Immediately! Do not induce vomiting unless directed by medical personnel. Rinse mouth with water if person is Conscious. Never give fluids or induce vomiting if the person is unconscious, having convulsions, or not breathing. A Material Safety Data Sheet (MSDS) for this product is attached. The MSDS contains detailed safety and health Information about possible hazards associated with the use of this product. Additional MSDS are available from your Employer or by contacting The Harris Group, Mason, OH 45040.

Price: 12.95 USD

Location: Santa Rosa, California

End Time: 2024-09-11T18:56:03.000Z

Shipping Cost: 3.5 USD