ShrinkRC Body Mounts for RC4WD 1985 Toyota 4Runner

Description: Body mount system for RC4WD 1985 Toyota 4RunnerVanquish VS410 All Versions Works with Fordyce, Phoenix, Pro, Ultra, and Builder's Kit. Use rod ends (AX31186), upper links (AX31421), lower links (AX31419), and set screws (AX31343) to get a 11.4" wheelbase. Works best with straight axles. Can also be used with portals but the front wheels will sit forward about 5mm due to the built in caster. Axial SCX10ii Use rod ends (AX31186), upper links (AX31421), lower links (AX31419), and set screws (AX31343) to get a 11.4" wheelbase. Not compatible with SCX10iii. Element Enduro/Sendero/Trailrunner Use 11.8" rear links from Element rear link set (p/n ASC42044) with Traxxas short rod ends (p/n 5347) to get a 11.4" wheelbase. (Not recommended for Enduro SE, Utron, or Stealth XF Transmission if using an interior.)RC4WD TF2 Direct fit.Redcat Ascent & Fusion Requires custom rear links. Please read:3.9 Tires recommended and/or be prepared to cut the body.Interiors will require cutting to clear the transmission. It is typically necessary to relocate the factory ESC, receiver, and battery tray.Holes must be made in the bed to clear the rear shock towers, or switch to shorter towers, or cantilevers.Stainless steel hardware included. Body not included. Made in USA. Shrink RCThis product is not affiliated with, endorsed by, or associated with Traxxas, L.P., or its products and services. Traxxas® and TRX-4® are trademarks or registered trademarks of Traxxas, L.P.

Price: 29.99 USD

Location: Oak View, California

End Time: 2024-08-26T15:34:44.000Z

Shipping Cost: 5 USD