New Cub Cadet ISO Motor Mounts 1000 1200 1250 1450 1650

Description: Brandnew set of 8 aftermarketrubber motor mounts to fit Cub Cadet Quiet Line tractors 1000,1200,1250,1450,1650 with Kohler K series engines The metal part of the mounts are not included in this auction, you must re-use your original metal mushroom shaped stems from the stockmount. The metal parts shown in the photo are for reference only. Photos with yellow backgroundhave new mount on the left and old stylemount on the right. ( note the large recess on the top of new mount thatcenters the holes in cradle and frame for a perfect tight fit) These rubbermountsare a direct replacement forthe original cubmounts Part # IH-61509-C2 ,without the very bad vibration caused by the hardnew style cub cadetfactory replacement mounts. They will fit both hydrostatic and standard transmission tractors. The stock original style soft rubber bushings are no longer available from cub cadet. Ihave used thesemounts on my personal Cub Cadet tractors for many years. They willhave a little more vibration than the stock mounts but aremuch more forgivingthan the new style cub cadet hard rubber replacements at a cost of $70-$80 for the set of 8. Included in this auction are 8 rubber mounts ( 8 used per tractor). Buy with confidence,Ihave soldmany sets of these mounts on Ebaywith very positiveresults.Please Feel Free to read the feedbackothers have left for this item. Worn or damaged motor mounts will cause the engine and cradle to drop off centerfrom the transmissionand can cause damage to the driveshaft and driveline components. For best results check the followingwhen replacing the mounts: Pilot bearing, Clutch drivehub(standard Transmission),rubber driveshaft couplers,engine mounting to cradlebolts andDriveshaft for straightness , Replace or repair any damaged components to minimize vibration. Directions will be included in package for installing motor mounts.These rubber bushingsare made from flexible rubber and can be installed on metal stems by hand witha coating ofliquid soap, do not use a vice or vice grips topress the bushingson to the metal stems, this can cause damage to the stems and rubber mounts. Shipping will beFirst Class Mail . Please provide a correct USPS Address for shipping. Item will be shipped the same day or following day payment is recieved. A postal delivery confirmation number will be sent to you the same day theitem ships. Please feel free to email with any questions you may have Feedback will be left as soon as feedback is recieved and you are happy with your purchase. Thanks For Looking. Ps. To answer a few questions about why these tractor have vibration from day one!!The K series Kohler engines used in these tractors do not have internal balance gears like the older cub cadet kohler engines that are mounted solid, that is why these engines are mounted with rubber mounts to help control the vibrationdeveloped by havingno internalbalance gears.Don't be fooled by ads forsolid steelor hard rubber mounts thesewill only make the vibration worse. The mountshereare made from a flexible rubber to minimize vibration and provide many moreyears of service from your cub. The last photo shows the original metal insert used with the original mounts , you will need 8 of these originalinserts to reuse for these mounts to work properly 1 for each rubber bushing

Price: 29.95 USD

Location: Madison, Pennsylvania

End Time: 2023-09-10T16:36:52.000Z

Shipping Cost: 4 USD