Metal brake lines for Mercury Capri 1970-1993

Description: Metal brake lines for Mercury Capri 1970-1993 total of 20 lines and couplers! includes special lengths for your Mercury Capri!(no need to buy a flaring tool!) our lines come in 3 to 4 inch increments, not like the ones found at the dealer or parts stores!!Buy for the future brake job!!! More than enough lines to do your entire Capri! This is a TrueBend metal brake line replacement kit. All lines are supplied double-flared at each end with the special bubble flare for your car. These malleable lines are easy to bend or coil without collapsing the tubing or restricting the flow of brake fluid. Four couplers are included to join lines where necessary. Instructions are also included.The average Carpri takes 25 feet of brake line to do the entire car, this kit has 40 feet of lines to fit all the various configurations.Use the extra lines for another project! Will not fit any ABS Modules. Here is a partial list of what lines are included to do the models above, unions are to make the longer length lines, instructions are included. you will receive a minimum of the following: 1x 6" Line 1x 8" Line 1x 12" Line 1x 16" Line 1x 20" Line 1x 23" Line 1x 27" Line 1x 30" Line 1x 33" Line 1x 37" Line 1x 40" Line 1x 43" Line 1x 47" Line 1x 51" Line 1x 60" Line 4x Unions Our TrueBend® brake lines resist corrosion, vibration, fatigue and shock from impact. They are coated for corrosion protection in compliance with GM132M-ASV and SAE J527B. Each line is manufactured by double wrapping a copper coated steel strip to form a double wall tube. Then, the tube is furnace brazed to fuse the copper/steel tube into one continuous and seamless tube. The tube is then given a outer coat for corrosion and abrasion resistance. These lines are the strongest and safest avai; yet can still be easily bent without kinking or without damaging the outer coat. This kit contains all the lines to do a wide variety of cars, and many different configurations, so you will have unused lines in any installation. These extra lines are a bonus that can be used for other projects The tubing is double walled, seamless and copper fused with a special inner and outer coating to provide protection from abrasion and corrosion. This is the same tubing that is used on new cars! The lines are supplied straight. If you need a very sharp bend next to the flare at the end of the line, you will need a bender listed under "tools/supplies" on our Ebay store. All unions are solid brass to stop rust. All lines are made in USA or Canada and are the stock 3/16" outer diameter with a factory flare. Click on the Ebay store link for more oldtime parts for your car. These items were offered from our large inventory of parts for both vintage cars and trucks. Please be specific and include the item # EE25488 in any correspondence Powered by SixBit's eCommerce Solution

Price: 69.99 USD

Location: Duluth, Minnesota

End Time: 2024-09-08T18:10:56.000Z

Shipping Cost: N/A USD