EVAP Smoke Machine Inflatable Bladder Pipe System Leak Detector Intake Adapter

Description: MRCARTOOL Easy intake adapter is an inflatable block-shaped airbag with a pressurized steam channel, which is used for intake and exhaust smoke test. The wall thickness is 1.5mm and its diameter can be expanded to 121mm. It helps technicians to quickly and easily test the entire intake or exhaust system. Note: Please make sure the intake/exhaust diameter is bigger than 2".Features:1.【Excellent Quality】MRCARTOOL Easy Intake Adapter is made of high-quality silicone, with strong sealing, softness, high temperature resistance, good elasticity, and tear resistance.All Easy Intake Adapters have undergone multiple simulation tests，ensure can detect intake and exhaust leakage more quickly and accurately2.【Humanized Design】Compared to traditional,MRCARTOOL Easy intake adapter with a steel ring removed at the end in order to use a smaller fitting.can be tested the intake/exhaust diameter is bigger than 2" more quickly and accurately leakage .3.【Widely Compatible】MRCARTOOL Easy intake adapter 100% compatible with car intake and exhaust ports, including small cars and heavy trucks. The inflatable bladder can be used with all EVAP system flue gas leakage testers, passing steam, detecting leaks in the car intake/exhaust system, Save more time and money and reducing leakage check the workload to realize quick repair4.【Widely Applicable】MRCARTOOL Easy intake adapter is suitable for any shape of intake and exhaust system,Connect the instrument, manually squeeze the hand pump to inflate the airbag, and then perform additional testing.such as round, oval, square, rectangular, even large angle and difficult to reach intake and exhaust system (note: intake/exhaust diameter needs to be> 2 inches), it allows steam through, you can quickly diagnose any air intake problems on the vehicle duct. • Compatible with any diagnostic leak detectorsCompatible with any diagnostic leak detectors, It fits 100% of automobiles, from passenger car to heavy-duty trucks, to quickly leak test the integrity of the entire induction system with one simple procedure. • Block off bladder conforms to anyBlock off bladder conforms to any shape of intake / exhaust: Round, oval, square, rectangular and even severely angled and hard to reach intake / exhaust systems, while allowing vapor to pass through for fast diagnostics. How to work?1.Clean the inner wall of the intake opening while the Air Filter, and the Throttle connections are removed, so as not to scratch the adapter.2.Close the Pressure Relief Valve next to the Hand Pump.3.Put the Rubber Component into the intake opening.4.Inflate the Rubber Componentby pressing the Hand Pump till the intake opening is tightly sealed.5.Now the system is ready to test, introduce air/smoke into the system by plug the smoke nozzle into the Tube Opening.6.After test, pull off the smoke nozzle, release the inflated air by open the Pressure Relief Valve next to the Hand Pump.7.Clean the adapter for storage, avoid contact with corrosive liquids.

Price: 19.99 USD

Location: Bordentown, New Jersey

End Time: 2024-11-06T09:41:08.000Z

Shipping Cost: 0 USD