DIY Mono Case-kit for Hypex NC250MP/NC500MP with all audio harness

Description: This DIY Mono case-kit, is designed for Hypex NC250MP and NC500MP Mono module, but NOT including any Hypex modulesAudio harness are free includedAlu feet, audio connectors, screws.... all are included;All in all, you just need to have Hypex NC250MP or NC500MP in hand, then you can start the great assembly procedures. Three options: Connectors: Soldering--- Soldering wires into standard XLR and Binding Posts;Solderless---XLR/Binding posts are screw-type connectors, no need any soldering proceduresFace-plate: you can choose Black or Silver face-plate. (The case body is always in Black color);LED color: you can choose one of Blue/Green/Orange/White colors; Pre-made audio harness included (Free)Pre-made audio harness, free includedAll cables are cut to the suitable length, with correct plugs on ends1 x Power supply cable: from IEC inlet to module;1 x Signal input cable: from module to XLR socket;1 x Speaker output cable: from module to pair of Binding posts;1 x LED power cable: from module to Dimmer LED PCB; Main FeaturesWell designed for Mono Mode, suitable for DIY Mono amp projectDefault pre-drilled holes for: NC250MP and NC500MP100% Aluminum Case, nice Ncore logo, Hi-END connectors...etcIncluding all connectors, switches, aluminum feet...etc shown in picturesDimmer LED: DC +10v~~~+26v supply, Led brightness could be adjusted manually at the bottom of chassisLED Color Option: Blue(Default), Green, Orange and White Brief SpecificationsCase Internal size: 193mm(W) x 58mm(H) x 180mm(D)Face-Plate: 8mm thickness & NCORE logo (Option: Blank face-plate without logo is available)Top-Cover: 3mm thickness, with full-size venting holes (Option: Blank top-cover without holes is available)Bottom-Plate: 3mm thickness, pre-drilled holes for Hypex modules (Free drilling for other modules)Rear-Plate: 3mm thickness, pair of XLR sockets, two pairs of Binding Posts, IEC socket with power buttonDC Supply for LED Dimmer: DC +10v ~~~ +26v Packing List (Per case-kit)Aluminum CasePower SupplyAudio PartsAccessories* Front-Panel x 1* Top-Cover x 1* Bottom-Platex 1* Rear-Platex 1* IEC Socket x 1* Power Button x 1* Female 3-Pole XLR sockets x 1* Binding Post(Pair) x 1* Pre-made audio harness* Dimmer LED x 1* Aluminum Foot x 4* Screws

Price: 135 USD

Location: 松江区

End Time: 2024-01-30T19:18:54.000Z

Shipping Cost: 0 USD