Dead Eyes Mooring Tools Fix Tool For Wood Ship Model Kit 1 Pecs/packet

Description: this tool can made the mooring cables work become simple and feasible.this tool can adjust the distance between mooring cables in a control range.The diameter range of the three-eye pulley which can be installed auxiliary is 3.5mm - 10mm, and the distance between the upper and lower three-eye pulley mooring cable is 10mm - 30mm. this tool is a kit, you need also assembly this.Features Length 70 mm Width 55 mm Height 7 mm material: wood Excluding three-eyed pulley and line how to use : combine 1 and 2 part with glue , and fix with Screw 2. First, determine the distance between the top and bottom of the three-eye pulley set you are going to make, and the actual distance of the blue arrow point to the blue line in the figure below. 3.Then loosen the auxiliary slider tightening screw (the red circle position in the figure below), then slide down and down according to the blue arrow direction to adjust the slider, align the scale line on the slider (the yellow circle above) to the distance you actually need, tighten the tightening screw to fix the slider 4.Hold the three-eyed pulley in front and back of your finger and insert it into the fixing groove of the pulley of the auxiliary device from the side. It does not need to be too tight, as long as the pulley does not loosen and fall, as shown in the following figure (it should be noted that the upper and lower sides of the fixing groove of the pulley must clamp the cable groove of the pulley): how to use : combine 1 and 2 part with glue , and fix with Screw First, determine the distance between the top and bottom of the three-eye pulley set you are going to make, and the actual distance of the blue arrow point to the blue line in the figure below. Then loosen the auxiliary slider tightening screw (the red circle position in the figure below), then slide down and down according to the blue arrow direction to adjust the slider, align the scale line on the slider (the yellow circle above) to the distance you actually need, tighten the tightening screw to fix the slider, and then proceed to the following steps; Hold the three-eyed pulley in front and back of your finger and insert it into the fixing groove of the pulley of the auxiliary device from the side.

Price: 14 USD

Location: Charlotte, North Carolina

End Time: 2025-01-19T17:21:16.000Z

Shipping Cost: 0 USD

Product Images

Item Specifics

All returns accepted: ReturnsNotAccepted

Brand: Branded

Type: Model Kit

Unit Type: Unit

Material: Wood

MPN: does Not Apply

Country/Region of Manufacture: United States

Unit Quantity: See Descriptiion

California Prop 65 Warning: N/A