audio-technica AT-LP8X Semi-Automatic Direct-Drive Turntable AUTHORIZED-DEALER

Description: WE ARE AN AUTHORIZED AUDIO-TECHNICA DEALER!AT-LP8XAudio-Technica expands its line of direct-drive turntables with the semi-automatic AT-LP8X, featuring a newly designed tonearm lift that automatically raises the tonearm at the end of a record side and stops the motor.The turntable’s J-shaped aluminum tonearm, inspired by classic A-T models of the 1960s and ’70s, comes equipped with a newly designed AT-LT10 headshell and AT-VM95E BK (black) cartridge with 0.3 x 0.7 mil elliptical stylus, providing excellent channel separation and low distortion for outstanding tonal quality. For easy customization, the stylus can be replaced or interchanged with any of the five additional styli in the VM95 line, and the tonearm’s VTA (vertical tracking angle) adjustment and subcounterweight enable the use of a broad range of other cartridges.The AT-LP8X plays 33-1/3, 45, and 78 RPM records. Its 25 mm rubber-damped, anti-resonance, die-cast aluminum platter comes with a 2.5 mm rubber mat and is driven by a sensor-monitored motor that ensures a continuously accurate platter rotation speed. The motor and its efficient internal switching power supply are housed within a box plinth constructed of 16 mm MDF (medium density fiberboard) and equipped with height-adjustable feet for excellent protection against unwanted noise and vibration.The turntable comes with a detachable RCA output cable (dual RCA male to dual RCA male with ground), 45 RPM adapter, and removable hinged dust cover.VM95 Series Interchangeable StyliRefine Your SoundThe turntable’s AT-VM95E cartridge is compatible with any Audio-Technica VM95 Series replacement stylus, making it easy to experiment with different styli profiles upgrade to a higher-quality stylus to enjoy more refined sound or switch to an AT-VMN95SP stylus to play 78 RPM records.Anti-Resonance MaterialsQuiet PerformanceThe turntable’s robust MDF box plinth, adjustable feet, thick rubber-damped, anti-resonance, die-cast aluminum platter, and 2.5 mm rubber mat work together to temper unwanted noise and vibration so you can enjoy all the detail of your music.FeaturesSemi-automatic direct-drive turntable with three speeds: 33-1/3, 45, 78 RPMMotor features a speed-sensor system to maintain accurate platter rotation speedNewly designed low-torque, direct-drive DC servo motor improves wow and flutter performance25 mm rubber-damped, anti-resonance, die-cast aluminum platter with 2.5 mm rubber matJ-shaped tonearm with adjustable VTA (vertical tracking angle)Newly designed tonearm lift automatically raises the tonearm at the end of a record side and stops the motorAT-VM95E BK (black) cartridge (0.3 x 0.7 mil elliptical stylus) is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and applicationNewly designed lightweight AT-LT10 headshellIncluded subcounterweight provides an expanded cartridge/headshell weight range of 14.0 g – 23.5 gNewly designed internal switching power supply, optimized for audio performanceMDF (medium density fiberboard) cabinet constructionPhono-level output provides pure, direct transmission of the cartridge’s signalIncludes detachable RCA output cable (dual RCA male to dual RCA male with ground), 45 RPM adapter, and removable hinged dust cover*A dedicated SP cartridge or the replacement AT-VMN95SP stylus is required to play 78 RPM recordsSpecificationsTurntableMotorDC servoDrive MethodDirect driveSpeeds33-1/3 RPM, 45 RPM, 78 RPMTurntable PlatterDie-cast aluminum, rubber damperStarting Torque1.0 Kgf.cmBraking SystemElectronic brakeWow and Flutter< 0.1% (WTD) at 3 kHz (JIS)Signal-to-Noise Ratio> 60 dBCartridge TypeVM (AT-VM95EBK)Output LevelPHONO: 4.0 mV nominal at 1 kHz, 5cm/secPower Supply Requirements100 to 240 V, 50/60 HzPower Consumption8 WDimensions450 mm (18″) × 352 mm (14″) × 161 mm (6.3″) (W×D×H)WeightApprox. 10.4 kg (23 lbs)Accessories Included・Dust cover・Rubber mat・Platter・Dust cover hinges・Counterweight・Subcounterweight・Headshell (AT-LT10) with VM stereo cartridge (AT-VM95E BK)・45 RPM adapter・RCA audio cable (Approx. 1.0 m (3.3′))・Power cable (Approx. 1.8 m (5.9′))Tonearm TypeStatic balanced J-shaped tonearmEffective Arm Length247 mm (9.7″)Overhang15 mm (0.59″)Tracking Error AngleLess than 2.0°Stylus Pressure Adjustment Range0.0 to 4.0 gApplicable Cartridge Weight14.0 to 20.0 g (including headshell)(When using subcounterweight: 17.5 to 23.5 g)Replacement StylusAT-VMN95EBKReplacement HeadshellAT-LT10NotesFor product improvement, the product is subject to modification without notice.Hi-Fi Heaven1549 Sixth StGreen Bay, WI 54304Contact us with your exact shipping address for accurate shipping cost.Larger speakers and items over 150lbs are strapped to a pallet and shipped via Freight including liftgate and residential delivery.We accept Pay-Pal or credit cards by contacting our store.We offer a 4% discount with payment by Zelle or check.Defective items are exchanged within 14 days from delivery.After 14 days, the manufacturer's warranty will apply. Contact us for any assistance in obtaining warranty assistance.Defective item returns must be in the manufacturer's original packaging, in like-new condition, including all packaging materials, shipped as-received and fully insured.Items are guaranteed to be as described.If a refund is desired, we will refund your full purchase price minus a 20% restocking fee.The item must be as received & unopened. Buyer pays return shipping costs.If you are having a problem, Please call before making a return claim on eBay.We do not offer free auditions or trials of merchandise.Returns will only be accepted for items that are truly defective.We use methods to detect product tampering.We will seek legal action against any individual or entity attempting to defraud us.Hi-Fi Heaven1549 Sixth StGreen Bay, WI 54304

Price: 999 USD

Location: Green Bay, Wisconsin

End Time: 2024-11-23T17:10:06.000Z

Shipping Cost: 0 USD