58mm STROKER DUCTILE IRON CRANKSHAFT 212cc predator gx200 gokart racing

Description: The 58mm crankshaft is stock in the 223 predator engines and a stroker for most clone and predator small block engines. governor gear can be removed. flywheel nut included.the 58mm crankshaft is made of ductile iron. ductile is the ability to flex before breaking. the ductile iron has superior absorption and higher fatigue strength performance over lesser cast crankshaft. the 58mm or 2.283" stroke is a great way to stroke your clone or predator without spending a fortune on billet crankshafts. the crankpin and journals are hardened to reduce wear and increase the strength of the crankshaft.ARC clone rod works with the crankpin but may require clearance to fit the block and not interfere with the camshaft. therefore this is not a drop-in solution but requires an experienced engine builder to assemble. COMPATIBILITYCRANK PIN: CLONE ROD FLYWHEEL TAPER: CLONE OR NON-HEMI PREDATOR FLYWHEELENGINE DISPLACEMENT INCREASE196 CLONE - 68mm BORE WITH 58mm STROKE = 211cc212 PREDATOR - 70mm BORE WITH 58mm STROKE = 223cc225 STOCK - 72mm BORE WITH 58mm STROKE = 236cc2.815 or 71.5mm with 58mm stroke = 232ccSTOCK CRANK STROKECLONE = 2.130"PREDATOR = 2.160"58mm CRANK = 2.283"This is the "SuperJet" STROKER 58mm +.080 STROKE Crankshaft in 212cc predators makes it a 223cc! (58mm stroke) makes your 196cc engine into a 211cc engine!bore68mm = 211cc70mm = 223cc72mm = 236cc76mm = 263cc RACE Tested when $500 billet stroker crankshafts snapped this ductile iron crankshaft has lived! This Crankshaft uses a "clone, Honda or non-hemi predator" taper flywheel ARC, PVL, Racesang, Ambush, ect.. You will need a "clone" or "honda" sized journal rod examples: ARC 6270, 6252, 6771, 6770 a stock clone/honda rod can be used where required. Stock piston can be used REQUIRES the 1.180 Honda journal sized rod and is machined for and requires the honda clone or non-hemi predator Flywheel! This is an ENGINE BUILDERS CRANKSHAFT. you or your engine builder will have to check and adjust for clearance issues! it is NOT just a bolt in and go... Clearance work is required please understand this is for high performance use only! it has no warranty and is non returnable and requires mechanical ability to install. please consult your engine builder

Price: 74.97 USD

Location: Monticello, Kentucky

End Time: 2023-11-01T15:00:59.000Z

Shipping Cost: 13.97 USD