1/32 A-26 Invader Early Diamond Tread Tire Upgrade NEW

Description: RESIN2detailHigh QualityFree ShippingCustomer Support1/32 A-26 Invader Early Diamond Tread Tire Upgrade NEW 1/32 A-26 Invader Resin Diamond Tread Tire Upgrade (Early Hub Type) DescriptionFinely detailed Main and Nose tire / hub replacements for the Hobby Boss A-26 Invader in 1/32. Subtly bulged to represent scale weight. Diamond Tread.Scale=1/32 A sharp hobby knife will also be needed to carefully remove the support structures. Great care has been given to the design and build orientation to minimize layering and pesky support structure residue. It is recommended that the modeler take a slow and methodical approach here, to avoid broken resin parts. While not super brittle, the resin parts will crack under pressure, and are not as resilient as injection molded plastic. Suited for ages 17 and up 3D printed. At note on 3D printed parts – while every effort has been made to minimize support structures (see pic(s) of part w/ supports in gallery), careful attention will be required while removing them to reveal the part. It took me between 2-3 min. (1) Wear Optivisors to get close-in to the part (2) I recommend using a sharp #11 blade to detach points near part attachment point (3) Use flush-cut shears to break off said supports near base/float. (4) Use razor saw to carefully detach/remove supports along bottom face. This is the method that I used; message me if you used a different method and it worked quicker/easier and I will share. Condition - Brand New Shipping - Free via USPS 1st class Thanks for looking! Choose from a Huge Selection of Top-Quality Model Kits and Accessory Brands! PaymentShippingReturnsPaymentShippingReturns We accept payment by any of the following methods: PayPal Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner! We offer FREE shipping on Most orders! Your order will be dispatched within 1 working day of receiving payment (Monday-Friday) and you should expect to receive it three to five days after dispatch (for orders sent RM 1st Class). In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement. If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not. You can return a product for up to 30 days from the date you purchased it. Any product you return must be in the same condition you received it and in the original packaging. High QualityFree ShippingCustomer Support1/32 A-26 Invader Resin Diamond Tread Tire Upgrade (Early Hub Type) Description Finely detailed Main and Nose tire / hub replacements for the Hobby Boss A-26 Invader in 1/32. Subtly bulged to represent scale weight. Diamond Tread. Scale=1/32 A sharp hobby knife will also be needed to carefully remove the support structures. Great care has been given to the design and build orientation to minimize layering and pesky support structure residue. It is recommended that the modeler take a slow and methodical approach here, to avoid broken resin parts. While not super brittle, the resin parts will crack under pressure, and are not as resilient as injection molded plastic. Suited for ages 17 and up 3D printed. At note on 3D printed parts – while every effort has been made to minimize support structures (see pic(s) of part w/ supports in gallery), careful attention will be required while removing them to reveal the part. It took me between 2-3 min. (1) Wear Optivisors to get close-in to the part (2) I recommend using a sharp #11 blade to detach points near part attachment point (3) Use flush-cut shears to break off said supports near base/float. (4) Use razor saw to carefully detach/remove supports along bottom face. This is the method that I used; message me if you used a different method and it worked quicker/easier and I will share. Condition - Brand New Shipping - Free via USPS 1st class Thanks for looking! RESIN2detail1/32 A-26 Invader Early Diamond Tread Tire Upgrade NEW 1/32 A-26 Invader Resin Diamond Tread Tire Upgrade (Early Hub Type) DescriptionFinely detailed Main and Nose tire / hub replacements for the Hobby Boss A-26 Invader in 1/32. Subtly bulged to represent scale weight. Diamond Tread.Scale=1/32 A sharp hobby knife will also be needed to carefully remove the support structures. Great care has been given to the design and build orientation to minimize layering and pesky support structure residue. It is recommended that the modeler take a slow and methodical approach here, to avoid broken resin parts. While not super brittle, the resin parts will crack under pressure, and are not as resilient as injection molded plastic. Suited for ages 17 and up 3D printed. At note on 3D printed parts – while every effort has been made to minimize support structures (see pic(s) of part w/ supports in gallery), careful attention will be required while removing them to reveal the part. It took me between 2-3 min. (1) Wear Optivisors to get close-in to the part (2) I recommend using a sharp #11 blade to detach points near part attachment point (3) Use flush-cut shears to break off said supports near base/float. (4) Use razor saw to carefully detach/remove supports along bottom face. This is the method that I used; message me if you used a different method and it worked quicker/easier and I will share. Condition - Brand New Shipping - Free via USPS 1st class Thanks for looking! Choose from a Huge Selection of Top-Quality Model Kits and Accessory Brands! Payment We accept payment by any of the following methods: PayPal Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner! Shipping We offer FREE shipping on Most orders! Your order will be dispatched within 1 working day of receiving payment (Monday-Friday) and you should expect to receive it three to five days after dispatch (for orders sent RM 1st Class). In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.Returns If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not. You can return a product for up to 30 days from the date you purchased it. Any product you return must be in the same condition you received it and in the original packaging. High QualityFree ShippingCustomer Support 1/32 A-26 Invader Resin Diamond Tread Tire Upgrade (Early Hub Type) DescriptionFinely detailed Main and Nose tire / hub replacements for the Hobby Boss A-26 Invader in 1/32. Subtly bulged to represent scale weight. Diamond Tread.Scale=1/32 A sharp hobby knife will also be needed to carefully remove the support structures. Great care has been given to the design and build orientation to minimize layering and pesky support structure residue. It is recommended that the modeler take a slow and methodical approach here, to avoid broken resin parts. While not super brittle, the resin parts will crack under pressure, and are not as resilient as injection molded plastic. Suited for ages 17 and up 3D printed. At note on 3D printed parts – while every effort has been made to minimize support structures (see pic(s) of part w/ supports in gallery), careful attention will be required while removing them to reveal the part. It took me between 2-3 min. (1) Wear Optivisors to get close-in to the part (2) I recommend using a sharp #11 blade to detach points near part attachment point (3) Use flush-cut shears to break off said supports near base/float. (4) Use razor saw to carefully detach/remove supports along bottom face. This is the method that I used; message me if you used a different method and it worked quicker/easier and I will share. Condition - Brand New Shipping - Free via USPS 1st class Thanks for looking!

Price: 18.39 USD

Location: Hackettstown, New Jersey

End Time: 2023-10-17T02:01:17.000Z

Shipping Cost: 0 USD